[Ardour-Users] Behringer FCB1010

Paul Davis paul at linuxaudiosystems.com
Mon Jan 30 05:41:30 PST 2017

You would need to write a MIDI binding map for that. The process for this
is documented in the Ardour manual.

Be warned - I have an FCB1010 and the messages it sends are not always
ideal for control purposes.

On Mon, Jan 30, 2017 at 2:39 PM, Matt Keys <matt at mattkeys.net> wrote:

> Hello list! My setup is a Intel NUC running Debian 8 amd64 and I'm using
> the default ardour3 package (ardour3_3.5.403~dfsg-3_amd64.deb). My audio
> interface is a Tascam 16x08 usb. I have the midi out port of the tascam
> plugged to the midi in of my foot controller, and the midi out of the foot
> controller plugged into the midi in of the tascam. I also have a M-Audio
> Keystation 88 plugged via usb. I'm able to use the M-Audio in Ardour, but
> my question is where do I configure the foot controller? I would like to do
> things like start/stop recording, control volume, stereo panning, loop
> start/stop, or effects insertion/removal.
> Regards,
> Matt
> _______________________________________________
> Ardour-Users mailing list
> ardour-users at lists.ardour.org
> To unsubscribe  or change your mailing preferences please visit:
> http://lists.ardour.org/listinfo.cgi/ardour-users-ardour.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ardour.org/pipermail/ardour-users-ardour.org/attachments/20170130/d339cd51/attachment-0002.htm>

More information about the Ardour-Users mailing list