[Ardour-Users] control channels

Thomas Vecchione seablaede at gmail.com
Fri Nov 12 10:22:10 PST 2010


  It sounds like you are using the control bus option for Ardour,
which is set when you create the session.  Make sure that box is not
checked unless you want it to be.


On Fri, Nov 12, 2010 at 12:44 PM, Joe Hartley <jh at brainiac.com> wrote:
> I did an overdub session for a song and added 2 mono 12string tracks.  After
> recording, I panned them left and right, but my export sounded odd, so I
> sat back down and found something amiss.  Even if I set the panner hard left,
> I still have sound coming out of the right speaker.  It's less, but it's
> still there.  The meters for the track show that I'm cutting the signal to
> one of the channels, and that's reflected in my master bus, but the
> monitor bus, which *should* simply have the master bus channels as its input,
> actually had 10 channels as input instead of 2.  Eight of these were
> [control] channels.  I neither understand nor desire these channels.
> Where do they come from, and how can I keep them from being created in
> the future?  Thanks!
> --
> ======================================================================
>       Joe Hartley - UNIX/network Consultant - jh at brainiac.com
>  Without deviation from the norm, "progress" is not possible. - FZappa
> _______________________________________________
> Ardour-Users mailing list
> ardour-users at lists.ardour.org
> http://lists.ardour.org/listinfo.cgi/ardour-users-ardour.org

More information about the Ardour-Users mailing list