[Ardour-Users] jack sample rate

[DA. Forsyth]

On 22 Apr 2008 at 21:36, John Rigg murmured decisively:

> On Tue, Apr 22, 2008 at 07:24:10PM +0100, John Rigg wrote:
> > ALSA should definitely _not_ be doing resampling with pro/semi-pro
> > hardware like this. It would destroy performance.
> 
> This could be the problem. IIRC recent versions of ALSA
> use plughw (which uses software resampling) as the default device 
> instead of hw:0 like older versions. If this is indeed the case,
> the hardware device will have to be specified in the command when
> starting jackd, eg.:
> 
> jackd -R -d alsa -d hw:0 -r 44100    (assuming your card is hw:0)
> 
> Try starting jackd with that on the command line. If it works,
> check that qjackctl is using a similar command, ie. with the -d hw:0
> (or whatever hw: number your card is) option.
> 
> John

thanks John, I'll do that.  it may have been reset when I upgraded to FC6, 
eh?  I'm reasonably certain it used to be pointed at hw:0


--
David                       http://iwr.ru.ac.za/~iwdf/
Due to the electricity supplier being unable to meet demand
for the whole country, the above server may be off at odd 
times.