[ardour-users] [ANN] Mackie MCU, BCF2000 and Tranzport testers wanted

[Giso Grimm]

John Anderson wrote:
> On Fri, 2007-03-23 at 09:46 +0100, Giso Grimm wrote:
>> John Anderson wrote:
>>> On Wed, 2007-03-21 at 14:57 +0100, Giso Grimm wrote:
>>>> A possible extensio could be to map home/end via shift1, and put
>>>> rew/ffwd on the same buttons without shift. Or use shift1+loop /
>>>> shift1+click for rew/ffwd, this is possible to reach with only one hand
>>>> (shift1+previous/next is hard to reach).
> 
> What's a good speed for ffwd and rewind? +2 and -2?

Ardour 0.99 uses +-8 for the MMC events ffwd/rew, something between +-4
and +-8 should be ok (above that it is hard to follow the musical
context, below that ffwd/rew is not that fast any more).

Best regards,

  Giso