[ardour-users] MMC adn the DM24
Studio Zodiak
studiozodiak at yahoo.ca
Thu Sep 28 11:40:01 PDT 2006
Hi,
use your tascam to generate MTC.
Go to midi/mc->machine control
and create a MTC generate from the supported devices menu.
The midi out from the tascam plugs into the midi-in of your soundcard and is the rerouted to the ardour seq from jack midi.
You the have to set ardour to be slave to MTC and voila!
HTH
Sylvain
----- Original Message ----
From: DuWayne Holsbeck <drh at niptron.com>
To: ardour-users at lists.ardour.org
Sent: Thursday, September 28, 2006 11:10:13 AM
Subject: [ardour-users] MMC adn the DM24
Ive been trying to get the play button working on my DM24. I know it
works, I saw it work on Ron P's system. But I can not get mine to
work :-(
I know that the DM24 is sending the codes, or at least the midi input
light blinks when I hit the buttons. I know the DM24 is recieving MTC,
because the clock syncs with Ardour.
When I turn tracing on, I can see commands coming from Ardour, but I do
not see any coming from the DM24, even though the midi input on the RME
is getting them.
In the connections window, of jack, I connect the midi input to the
Ardour seq input. The Ardour seq output goes to midi output.
Any suggestions on what I may be doing wrong?
DuWayne
_______________________________________________
ardour-users mailing list
ardour-users at lists.ardour.org
http://lists.ardour.org/listinfo.cgi/ardour-users-ardour.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ardour.org/pipermail/ardour-users-ardour.org/attachments/20060928/f98764cb/attachment.htm>
More information about the Ardour-Users
mailing list