[ardour-users] sync source = MTC(SMPTE) ???
Kevin Cosgrove
kevinc at doink.com
Thu Feb 10 10:44:11 PST 2005
On 10 February 2005 at 19:19, <marco at deepinsidemyself.de> wrote:
> now MTC works fine....
> <MIDI-port tag="hw:0" device="/dev/snd/midiC0D0" type="alsa/raw" mode="duplex"/>
My ardour.rc says in part:
<?xml version="1.0"?>
<Ardour>
<MIDI-port tag="hw:0" device="/dev/snd/midiC0D0" type="alsa/raw" mode="duplex"/>
<Config>
<Option name="mtc-port" value="hw:0"/>
<Option name="jack-time-master" value="yes"/>
<Option name="jack-transport-master" value="yes"/>
<Option name="stop-at-session-end" value="yes"/>
</Config>
When I start ardour I see this in my xterm:
Ardour/GTK 0.446.0 running with libardour 0.724.0
Loading UI configuration file /etc/ardour/ardour_ui.rc
Loading system configuration file /etc/ardour/ardour_system.rc
Loading user configuration file /home/kevinc/.ardour/ardour.rc
MIDI: MTC on port hw:0 MMC on port hw:0
That looks to me like an MTC port is defined. Now I can define
the Sync Source as MTC(SMPTE) in the options editor. I still need to
see if the hardware actually syncs, but this would appear to be
pretty good progress.
Thanks all!
--
Kevin
More information about the Ardour-Users
mailing list