<div dir="ltr"><br><br>On Wed, Apr 8, 2020 at 11:21 AM Ralf Mardorf <<a href="mailto:ralf.mardorf@alice-dsl.net">ralf.mardorf@alice-dsl.net</a>> wrote:<br>><br>> On Wed, 8 Apr 2020 18:45:24 +0100, Anahata wrote:<br>> >On Wed, Apr 08, 2020 at 10:25:19AM -0700, Mark Knecht wrote:<br>> ><br>> >> at some point while using Mixbus audio out<br>> >> of the Scarlett just stops. Mixbus continues to work - all meters are<br>> >> running - but audio stops coming out of the Scarlett. Sometimes the<br>> >> Mixbus error log will show an xrun, sometimes not. <br>> ><br>> >The fact that it's a laptop and you mention xruns makes me wonder if<br>> >you have Wireless networking active? If so, the first thing I'd try is<br>> >disabling that, as it's certainly known to break latency on many<br>> >systems. It's a stretch from that to audio stopping completely, but<br>> >let's eliminate that possibility first.<br>><div><br><div>Thanks to all who have answered. The responses are showing up here in a couple of threads so I'll try to consolidate here:</div><div><br></div><div>1) I've tested with Wifi turned on and off and also using wired networking. Bluetooth was always disabled. It's possibly a bit better with Wifi off but it did fail. It would take time to determine if it's really better but I can say it still happened twice using a wired network connection so I don't quite yet think this is the root cause. That said one time I started a Netflix video, had a long delay, and when the video finally started sound was gone. I pulled and reinserted the USB cable and sound started up. I tried this through a couple of reboots 4 or 5 more times and they all worked fine.</div><div><br></div><div>2) I will investigate a different USB cable. </div><div><br></div><div>3) While I haven't used the Scarlett in a lot of other configurations it was 100% stable under Windows on a different laptop using Native Instruments stuff and has never caused me any concern on my larger HDSP 9652 system. I can do more testing on the big system to verify though.</div><div><br></div><div>QUESTION: I don't know that xruns are even involved in this. Most of the time they are not called out in the log file. However if xruns are somehow involved is there a way to tell Ardour to simply ignore xruns? For my immediate needs - just playing at night in some corner of the house capturing ideas - I don't care about a few pops and glitches. Longer term I want to solve this problem but my immediate needs don't require it. (Heck - my immediate needs are met by pulling the cable - it's just frustrating!)<br></div><div><br></div><div>Thanks,</div><div>Mark</div></div></div>