<div dir="ltr">Hi all,<div>   A voice from the deep, dark, long ago past has returned. </div><div><br></div><div>   I've been using Mixbus32C for maybe a year now for just some personal recording projects. Up until recently I was using a Scarlett 2i2 3rd gen USB device and everything works perfectly well for my modest needs. In the last week I dug out my Hammerfall hdsp9652, got it installed and working in the machine. It works fine as a system audio card playing audio out through playback_1/2.</div><div><br></div><div>   I do have an issue though when using either Mixbus or Ardour. It appears that with a default, new session setup, all of the audio directed toward the playback hardware, at least with a default setup that uses playback_1/2 on the Hammerfall card, this audio is possibly duplicated on the spdif output. The easiest way I've found to duplicate the problem is to create a new session, enable the metronome and hit play. In HDSPMixer I see the click on both playback_1/2 and spdif.L/R.</div><div><br></div><div>   I say 'possibly' above as I don't have spdif hardware right now to listen but I see it in the mixer so I'm assuming it's there. spdif hardware is ordered and should be here by the weekend.</div><div><br></div><div>   I was wondering if any other Hammerfall users have seen this or whether there's possibly an option somewhere the specifically duplicates output audio on the spdif output.</div><div><br></div><div>   The default spdif options in hdspconf are all unchecked. I've not yet tried setting those to see if there's any difference.</div><div><br></div><div>   Any ideas on this issue are appreciated.</div><div><br></div><div>Thanks,</div><div>Mark</div></div>