<div dir="ltr"><br><div class="gmail_extra"><br><div class="gmail_quote">On Tue, Apr 3, 2018 at 10:19 AM, Chris Caudle <span dir="ltr"><<a href="mailto:chris@chriscaudle.org" target="_blank">chris@chriscaudle.org</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">The default might be OK, just depends on whether you need to know the<br>
actual time it was recorded or if you might have a full day worth of<br>
recordings to go through.  Setting to actual (wall clock) time could have<br>
the disadvantage that Robin pointed out, if you import directly into<br>
Ardour you may end up with a project with 12 or 15 hours of blank space at<br>
the beginning.<br>
<br></blockquote><div><br></div><div>I think that huge blank space issue happened to me when I tried to export to video a few days ago. <br> <br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
I had to find the manual for the R8, it seems to have several options for<br>
timecode settings.<br>
Internal free run vs.  internal record run is one, when set to record run<br>
there could be some delay in starting up the time code generator when you<br>
start recording.  Not for sure, just something to verify.  Should not be<br>
an issue when set to internal RTC run according to the manual description.<br>
<br>
Is internal auto mute set to on or off? That mutes timecode output when<br>
recording is stopped, that could be another place that there is an<br>
indeterminate delay when going from off to on.<br></blockquote><div><br></div><div>Thanks for looking at the manual. <br><br></div><div>The default of auto mute is off on Free Run and RTC mode and I didn't change it. <br><br></div><div>The main issue might be some missing data in the first part of the LTC on CH1 of the video. After a bunch of videos, I may be an error pattern I didn't understand at first. I am using analysis tools that Robin wrote and I'll ask him about the results. <br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<br>
It might be useful to use a clapboard or similar to give you an easy to<br>
find location in the audio and video to check whether the "few seconds<br>
off" value is always the same or whether it changes from start to start.<br>
<br>
--<br>
Chris Caudle<br>
<br>
<br></blockquote><div> <br></div></div><br></div><div class="gmail_extra">I've been filming the start of each video using the clock of one of my phones. <br><br></div><div class="gmail_extra">I am looking at getting a hardware slate like a Denecke TS-3 - to keep my sanity I only use software in post :-) . <br><br></div><div class="gmail_extra">I am unsure though if I want to send timecode to the slate or have it generate it. I would have to "JAM" either the F8 or the slate, if I understand correctly. <br><br></div><div class="gmail_extra">Thanks for the help!<br></div><div class="gmail_extra">Robert<br></div><div class="gmail_extra"><br></div></div>