<div dir="ltr"><div>Hi,</div><div><br></div><div>I have recently purchased a Midas M32 as a gift to myself for surviving my divorce ;) I have been able to set it up to allow me to do normal routing with 'in the box' mixes,  using the M32 for a kind of mastering approach. It sounds incredible! I have also connected ll the outs from my rayDAT to do 'out of the box' mixes, which also sound great.</div><div><br></div><div>However, I want to use it as a full controller for the DAW, as I like the old fashioned ability to move multiple faders at once with both hands. The M32 has DAW Mackie and OSC control, but only moves the faders in the bank of 8 to the right (bus/matrix faders), not the multiple banks of 16 faders that are the normal channel faders (1 - 32).</div><div><br></div><div>So, I am of the belief that I can actually set a control ID to each fader on the M32, and to each fader in Ardour. If that is true, then I simply need to map each DAW fader to the M32 fader. Could Someone point me in the right direction from the Ardour point of view? I am good with XML, and most scripting languages, but VERY rusty in C (think decades). I'd be very happy to hand over the results of the mapping so that no one else has to go through that process, I just need pointers ... </div><div><br></div><div>... or am I just Crazy and it cannot be done?</div><div><br></div><div><br></div><div>thanks!</div><div><br></div><div>Richard</div><div>----------------------------------------------------------------------------------------------------------------</div><div>i7 CPU, 32G RAM, 500G SSD, RME rayDAT, HS7 monitors, HS8 sub, Midas M32+XDAT .</div><div>----------------------------------------------------------------------------------------------------------------</div><div><br></div><div><div class="gmail_signature">be light of step and full of heart,<br>live in seconds,<br>dream in lifetimes,<br>and always<br>always<br>carry a spare</div></div>
</div>