<div class="gmail_quote">On Sun, Jul 29, 2012 at 12:42 AM, Paul Davis <span dir="ltr"><<a href="mailto:paul@linuxaudiosystems.com" target="_blank">paul@linuxaudiosystems.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<div class="gmail_quote"><div>if you use a monitor bus AND you use AFL or PFL then *by definition* "soloing" (AFL or PFL) does NOT affect what is on the master bus.</div></div></blockquote><div><br></div><div>I wasn't expecting it to. I don't think we are quite understanding each other. At least, so far as I understand what you have said, it describes something different to what I am talking about.</div>
<div> </div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div class="gmail_quote"><div>that's the whole point of using a monitor bus and AFL/PFL - soloing occurs on the monitor bus ONLY and the master (which may be feeding another recorder, or the main PA, or whatever) is left unaffected.<br>

<br></div></div></blockquote><div><br></div><div>Yes, I don't want to affect the master. I want to "listen" to the track, via the monitor at [post-fader but before the mute] in the signal chain. In other words, After Fader Listen, or at least what I thought AFL stood for. This way I can listen to incoming live feeds, with effects, and then drop them in the master for output to the PA by un-muting the track. In other words, listen to live feeds in headphones before dropping them into the mix. Perhaps my live use is at odds with studio use. I guess this is what is called the "cue" switch on hardware DJ mixers.</div>
<div><br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div class="gmail_quote"><div>i don't think there is any way to do what you want, not in ardour</div>
</div></blockquote><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div class="gmail_quote"><div>, or on any console that provides AFL/PFL. this suggests that you should probably rethink what you want :) what are you trying to do that requires this?<br>

<br></div></div>
</blockquote></div><div><br></div><div>Actually I jury-rigged to get what I want by using a post-fader send in each track, with a midi controller setting the send volume. I say jury-rigged because this requires using puredata to generate midi messages, as Ardour sliders don't seem to accept single midi values to set their level at a specific volume. If i send say, a value of 127 to the CC assigned to midi of the send level, then the gain level does not change to 127. I guess this has something to do with controller pickup logic. </div>
<div><br></div><div>So to actually change the volumes I have to send a line of controller increments over a 500 millisecond period. In other words, automated fade-ins or fade-outs. This is not instantaneous which makes rapid monitoring difficult, but it at least achieves what I want. The send buses are all routed to the hardware output of my headphones. </div>
<div><br></div><div>The advantage of this approach is that it is flexible - I can listen in at any point in the signal chain by simply sliding the send up or down. If sends had a mute I guess I could do what I originally wanted, and retain this flexibility.</div>
<div><br></div><div>tl;dr: Guy thought Ardour could do something, got it to almost do it another way.</div><div><br></div><div><br></div>
<div><br></div><div><br><div><br></div></div><div><br></div>