Hmm those fields should certainly not be missing if you have an audio options tab show up at all. Something is very strange there.<br><br>However in the meantime what you might try is using JackPilot or QJackCTL to start Jack before starting Ardour. This being said I would love to troubleshoot this over IRC sometime, but may not be around much beyond the first two days of this week as I seclude myself to catch up on my freelance work(In other words I take a vacation to work:)<br>
<br> Seablade<br><br><div class="gmail_quote">On Sun, Feb 27, 2011 at 5:37 AM, Zoran Spasojevic <span dir="ltr"><<a href="mailto:nature@timeprints.com">nature@timeprints.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
<div><div></div><div class="h5">On 02/27/2011 09:25 AM, Stef wrote:<br>
<blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
<br>
<br>
I started first with the utility RME provides (Fireface USB<br>
Setting) to just set<br>
the frequency and few other parameters. I could not get ardour to<br>
to work with that.<br>
Just out of desperation I tried using totalmix.<br>
A few months back I had an apogee duet for a few days and it<br>
worked fine with ardour.<br>
It is beyond me why I can not get babyface to work with this time.<br>
Apparently, ardour (jack) sees all the inputs and outputs from<br>
babyface but<br>
none of them is getting the signal into ardour.<br>
RME instruction manual is not the most useful so I am not sure<br>
what to do at this point.<br>
<br>
<br>
I have a RME FF800 and it works fine with ardour.<br>
You can change frequency from the Fireface Settings application. But you should use the same frequency in you project.<br>
<br>
Totalmix will help you only if you have specifics needs. It should work out of the box.<br>
<br>
I do not have my FF800 in front of me. I can take a look tomorrow morning but it is possible that FF800 and babyface do not share the same setup.<br>
<br>
Stef<br>
</blockquote></div></div>
I am looking at the differences of my linux setup and the mac setup.<br>
When I start ardour on Linux in the first start up screen under audio setup I sea fields<br>
Input Device (ICE 1712 multi) Output Device (ICE 1712 multi)<br>
(this is showing my M-Audio internal sound card).<br>
However, when I start ardour on my macbook these fields are missing.<br>
A lot of fields are missing under Options.<br>
Perhaps the difference is between the ardour versions I am using on linux and OX (I am not too skilled to tell this).<br>
But perhaps the babyface is not recognized properly on macbook and this is the source of the problems.<br>
I am just not sure what the problem is. It seems all the signals are rerouted back to the babyface and noothing come to the computer/ardour.<br>
Thanks,<div><div></div><div class="h5"><br>
zoran<br>
<br>
_______________________________________________<br>
Ardour-Users mailing list<br>
<a href="mailto:ardour-users@lists.ardour.org" target="_blank">ardour-users@lists.ardour.org</a><br>
<a href="http://lists.ardour.org/listinfo.cgi/ardour-users-ardour.org" target="_blank">http://lists.ardour.org/listinfo.cgi/ardour-users-ardour.org</a><br>
</div></div></blockquote></div><br>