Im seeing an odd issue, but first i need to explain my workflow.  Im currently running Fedora core 10 and Ardour 2.8.7, and a few versions ago (i dont remember how many but it was possibly in the 2.7.x area) i created a template that only contains the Master bus and a Monitor bus.  The Master bus is the standard except that it has a send (pre-fader) going to the Monitor bus.  The Master bus outputs to hw:1 and hw:2, while the Monitor bus outputs to hw:3 and hw:4.  In a nutshell, my Master bus outputs to my reference monitors in the recording area while the Monitor bus outputs to my mix-down monitors.<br>

<br>Onto my issue: when i create a new session using the template and add a track, the new track automatically outputs to the Master (which is what i want), but it also creates another output that has the word '[control]' on it that links to the Monitor bus too. This can create issues since the Monitor now has inputs from both the Master send and directly from the new track.<br>

<br>Has anyone else seen this?  Am i doing something wrong?  Should i just drop the send from the Master bus if Ardour is going to auto-magically tie in the Monitor bus too?  The only problem with that is that i usually put a compressor on the Master pre-fader to avoid slight clipping, so i would have to create an identical on both busses.<br>
<br>I have a test session where this issue is happening if needed.<br><br>Thanks<br>--Brett<br><br>