Giso-<br><br>  A couple of things to note here, one is that what you are describing really isn't utilizing TOUCH mode.  Two is that I believe that issue was fixed some time ago so if you haven't already you may want to upgrade to the most recent version of Ardour.<br>
<br>Nettings-<br><br> The BCF IIRC doesn't actualy have touch sensitive faders, so operating in a true TOUCH mode isn't possible with it.  To answer your question, the TOUCH signal is a simple MIDI signal, so if trying to bind a controller with TOUCH sensitivity enabled it would almost certainly screw with things how MIDI bindings are currently set up in A2.  A3 however is another story still in progress.<br>
<br>The only way to currently utilize TOUGH mode with a control surface is with the Logic protocol, and only with surfaces that implement touch sensitive faders and the appropriate MIDI signals for TOUCH.<br><br>       Seablade<br>
<br><div class="gmail_quote">2010/2/11 Giso Grimm <span dir="ltr"><<a href="mailto:gg3137@vegri.net">gg3137@vegri.net</a>></span><br><blockquote class="gmail_quote" style="margin: 0pt 0pt 0pt 0.8ex; border-left: 1px solid rgb(204, 204, 204); padding-left: 1ex;">
Hi Jörn et al.,<br>
<br>
I sometimes use "touch" automation with BCF2000 in Mackie/LC mode. I do<br>
not know what the touch mode should work, but I use it while transport<br>
is stopped to add/modify single points in the automation. Then ardour is<br>
interpolating between those points. Existing automation is not modified,<br>
or only, if the playhead is exactly at the time of an automation sample.<br>
Once the automation is corrected in touch mode, I switch back to "play".<br>
<br>
In earlier versions there was a problem when switching between manual<br>
and touch mode: In touch mode, all faders have been reset to 0dB, even<br>
if they have been configured manually to another value. I think this has<br>
been fixed near 2.7.x, but I am not sure.<br>
<br>
I hope this helped.<br>
<font color="#888888"><br>
Giso<br>
</font><div class="im"><br>
Jörn Nettingsmeier wrote:<br>
> hi everybody!<br>
><br>
><br>
> can anyone explain how "touch" automation works in ardour, and if<br>
> there's a workaround to get the behringer bcf to work in touch mode?<br>
><br>
> afaiu, professional controllers generate an additional "fader touch"<br>
> event - i wonder how that would translate to a simple MIDI controller<br>
> binding?<br>
><br>
> is it possible to have ardour react to incoming MIDI events which are<br>
> *not* caused by ardour sending controller feedback?<br>
> i.e. ardour lets the faders fly, i grab one, parameter change, ardour<br>
> lets go and starts recording automation events.<br>
> alternatively, mapping one of the toggle buttons to a "take manual<br>
> control and write automation/ release manual control and play back<br>
> existing automation" would work as well...<br>
><br>
> how are other people using touch automation?<br>
><br>
><br>
> best,<br>
><br>
> jörn<br>
><br>
><br>
><br>
<br>
</div><div><div></div><div class="h5">_______________________________________________<br>
Ardour-Users mailing list<br>
<a href="mailto:ardour-users@lists.ardour.org">ardour-users@lists.ardour.org</a><br>
<a href="http://lists.ardour.org/listinfo.cgi/ardour-users-ardour.org" target="_blank">http://lists.ardour.org/listinfo.cgi/ardour-users-ardour.org</a><br>
</div></div></blockquote></div><br>