This looks about right. I think what is happening is you are using the sound card's internal mixer to monitor, which may send the input to the output *before* it gets coded to the distorted digital signal ardour recieves. if you try to use ardour's 'software monitoring' i think it will sound distorted there, as that will let you hear what ardour 'hears', helping to adjust the input levels from there.
<br><br>as Jesse said, you need to make sure the meters are reading the values from the input when you are recording. when you arm the track for recording it should set itself to this automatically, but maybe there is a setting somewhere to disable that that has been set.
<br><br>i would completely ignore the meter on the behringer (other than to make sure that the behringer is under clipping level within itself), as the output level of the behringer may be too much for the input level (at least when being encoded) of the sblive.
<br><br>an easy way to set the level (if you are having trouble getting the input meters to work for whatever reason) is to start a dummy recording with either the behringer's output (or the sblive's input if you have a livedrive etc) set right down and slowly bring the level up while watching the waveform output in ardour (rather than the input meters). you could also use something like meterbridge (set to the digital peak meter to ensure accuracy) and send the track's output through that. you would need to watch for the 3db difference though i think.
<br>once you have set that level, look at the behringer's output meter and use whatever value that reaches as the new '0db' reference point from now on. of course if you can adjust the live's input level instead you don't need to worry about that.
<br><br>porl<br><br>On 10/24/07, Thomas Dermako <<a href="mailto:dermakot716@gmail.com">dermakot716@gmail.com</a>> wrote:<div><span class="gmail_quote"></span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
Still working on this - here's a screenshot.<br><a href="http://i225.photobucket.com/albums/dd284/dermakot716/Screenshot.png">http://i225.photobucket.com/albums/dd284/dermakot716/Screenshot.png</a><br>Notice that the meter shows -3 db max, but the audio is quite distorted.
<br>This time I'm not monitoring thru the board at all and the levels are set<br>really low. Yeah ok, behringer's crap, but I've been using this to monitor<br>for over a year now with no probs. Any other ideas?
<br></blockquote></div><br>