<br><br><b><i>Jesse Chappell <jesse@essej.net></i></b> wrote:<br><br>>OK, this is a common misconception with ardour, muting a trackactually >does nothing to save either disk I/O or CPU.  It can beargued that this is >silly, but this way you can get instant reactionfrom the system when >unmuting.   The right way to disable a track andsave both disk and cpu is to >make it inactive, by right-clicking onthe track header, or the mixerstrip name >button and unchecking theActive item.  Doing this for all your unused tracks >might just get youenough bandwidth for your current session.   You can >always make them active again later.<br><br>I am down to 24 active tracks at 96kHz and the error appears just as often.<br>Is there something else in Ardour I should look at?  The problem seems to get worse the more I work on the session.<br><br>>As others suggested, it is always best to have your session on acompletely >separate drive from your
 system disk, to avoid anyunnecessary seeking >due to system activity.  Even better for you wouldbe to set up a SATA RAID >array using multiple disks, which couldactually sustain your high track counts >and sample rate.<slidgey@yahoo.ca><br><br>Can you recommend a good HOWTO or other documentation for setting up the correct RAID array (1+0?)?<br>Is it possible to do it without reinstalling the OS?<br><br><br><br><br></slidgey@yahoo.ca><br><p>
      <hr size=1>Ask a question on any topic and get answers from real people. <a href="http://ca.answers.yahoo.com"><b>Go to Yahoo! Answers.</b></a>