In the not too distant future I may be looking at using a setup for live concert/drama recordings that will comprise of an ardour system to live multi-track audio record, and 1 or 2 pro video cameras to put together a dvd.  I was thinking that the whole job of synchronisation would be much easier if I could run the same timecode to the camera/s and to ardour.  My question is, how would one achieve this?  I currently have ardour set up to my behringer ddx3216 desk and sending mtc and mmc quite nicely, however it seems that the desk is designed to only receive timecode and not transmit it.  This means currently I can control the ardour transport and location marker with my desk, while ardour sends time code.....which is perfectly fine.  However in a more complex environment, I'm not sure how I could achieve this.  I could send to the midi-thru on my desk to a piece of hardware that would translate the timecode into a more standard form for video cameras (via rg6 terminated with bnc I believe?), if such a piece of hardware existed!  Or I could Get an external timecode generator and make ardour and the cameras a slave.  Question is, how/does ardour receive smpte timecode through the normal means of an audio connection?  Also I have an RME HDSP9652 card, so it's inputs are all ADAT with BNC for wordclock, and midi in/out, no analog.
<br><br>In the past when syncing two video angles together in an editor I just enabled both audio tracks from each camera and aligned them until it was synced and then muted out the second audio track, however it was quite a time consuming process, and I'm hoping for a better way (and one that doesn't involve forking out $100,000 for a post-production suite!).
<br><br>Cheers,<br>Andy J<br>