Hello again,<br>
I got the message that I must have been missing something when it
came to exporting tracks from ardour and I figured out how to do the
region export from the master track to export my song(s), but it's not
quite what I was trying to achieve (yet).<br>
<br>
I've never really introduced myself even though I've been lurking for a
while with the odd question, I'm a noobie to audio production world and an old hat at unixy
software. I had Logic with windoze but it was a mess. I decided that I
would invest my time learning about audio production with ardour about
three years ago and put my efforts into building a kicking
Linux Box(s). Ardour is the only audio production software I've used.<br><br>I never thought I'd be in a hot
band, I've always been a computer geek so the entire music thing is new
to me. My band mates are as impressed with ardour as I am,  we just plug in and
record all day (no hassles with sludgy filesystem performance late in
the day or bsod) so they don't mind my geekyness. So far we've
recorded about 17 of our songs, enough for a decent cd, which I'm
working on at nights and in the mornings.<br>
<br>So I've been trying not to post unnecessarily and work things out
for
myself but I have a hard time keeping up with the amount of posts to
this list which means I often miss things and end up searching
searching searching, I do RTFM. I buy as many audio production books as
I can and it's been a serious learning curve. I know what I want to
achieve but often don't know how to explain properly so I'm sorry, I
don't mean to waste anybodies time (especially you Paul as I can
understand a software project such as this must be a HUGE effort). <br>
<br>
I figured with my
last post I told you guys what I was doing and not what I was trying to
achieve. So I'm gonna try, please forgive or correct my terminology
where I get it wrong.<br>
<br>I've been working on our track's 'gain structure' prior
to effects sends to identify transient sounds and adjust the gain
automation where the transients occur, so I cat get a nice meaty raw
volume before I start with
the effects (I use some low/band/high pass filtering and eq plug-ins in
the pre-fader section). I've got some VU meters and set 0vu to roughly
-13db on the
ardour peak meters using a 1khz tone as a starting point. From there I
record the
tracks onto a spare track and look for indications of clipping in the
recorded track to adjust the gain automation of certain parts that
cause the transient sounds that result in clipping. Once I'm happy with
that I recalibrate the vu to my next target and repeat the process two
or three times prior to compression and other effects.<br>
<br>
I got to the stage of using the busses to put effects in the mix and my intention was to repeat the same process with the
effects busses in the mix, when I found the busses won't record to the spare
track. To avoid clipping and smooth the
transient sounds  produced by the effects into the mix I thought I
might be able to record onto a spare track so I can see when I am close
or over the line.<br>
<br>
Is there any other way I can do this, I don't even know if there is a right way.<br>
<br>
I'd appreciate any advice - Thanks <br>
 <br>
<br><div><span class="gmail_quote">On 3/12/06, <b class="gmail_sendername">audio lathe</b> <<a href="mailto:audiolathe@gmail.com" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">audiolathe@gmail.com
</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
<div style="direction: ltr;"><br><br><div></div><div style="direction: ltr;"><span><span class="gmail_quote">On 3/10/06, <b class="gmail_sendername">Paul Davis</b> <<a href="mailto:paul@linuxaudiosystems.com" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">

paul@linuxaudiosystems.com
</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
> I checked the jackd manual and tried to use the option to jackd --<br>> port-max but got a usage message and jack exited.<br><br>what usage message?</blockquote></span></div><div style="direction: ltr;"><div><br>


Apologies, my bad, it was the alsa module usage message, I misplaced the
--ports-max arg causing the error.  I'm spending too many late nights doing
mixes.<br>
 </div></div><div style="direction: ltr;"><span><br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">> I also tried setting the inputs of the busses to the outs of the
<br>> various tracks and found that the settings were gone after I reloaded
<br>> the session (I double checked that I set the inputs more than once to<br>> repeat the problem)<br><br>this is typical when running out of ports causes problems.</blockquote></span></div><div style="direction: ltr;">

<div><br>
<br>
that sorted that, deepening my sense of embarrassment for posting late at night.<br>
 <br>
</div></div><div style="direction: ltr;"><span><br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">> I also found when recording my mix down to a stereo track within
<br>> ardour that the busses  I send to don't appear on the recording to the
<br>> track, only when I use in's on the bus, am I doing something wrong?<br><br>please restate. i can't understand quite what you mean here.<br><br></blockquote></span></div><div style="direction: ltr;"></div><br>
Ok, I have track(s) with recorded audio on it and buss(es) set up for
effects. The track and buss outputs are to the inputs of the master out
via the output button and the bottom of each strip. <br>
I have a track setup to record the tracks and effects busses of this mix for this session (Audio12).<br>
<br>
When I set up a pre-fader send to a buss it will play fine and I can
hear the effect, I record enable Audio12, but when I press master
record and play, and start the transport, the busses go silent and are
not included in the recording. I've tested this by selecting two tracks
only (guitar and kick bass), activating the sends (which plays fine)
then disconnecting the output of the tracks from the (input of the)
master out so only the effects busses are audible, which worked as
expected. When I pressed master record and start, the effects buses
again went silent.<br>
I took it a little further and put a post-fader send from the master to
the record track then I tried a post fader send from the buss to the
record track but both went silent when I pressed record.<br>
<br>
So I'm not real sure what else I should do here or if I'm totally
missing something, I know what I want to do, and it sounds right when I
do it - it just won't record.<br>
<br>
What did work was when I set the buss input to the track output, when I
disconnected the track output from the master it recorded the buss
effect output ok, but this is not what i am after (huge as it sounds)
as I'm trying to send track pre-fader audio to the buss for recording
(to support the sound rather than overwhelm it with fx). <br>
<br>
I tried piping the sound through jammin and back to my record track
with much the same results but I'm still trying things here (plus I'm
not ready to master yet). The same thing is happening when I use
inserts. Maybe I could send a screenshot, it might clear some things up?<br>
<br>
I hope I made more sense this time around, if you need anymore detail let me know. <br>

Thanks for responding.<br>
<br>

</div></blockquote></div><br>