<br><br><div><span class="gmail_quote">On 3/10/06, <b class="gmail_sendername">Paul Davis</b> <<a href="mailto:paul@linuxaudiosystems.com" target="_blank" onclick="return top.js.OpenExtLink(window,event,this)">paul@linuxaudiosystems.com
</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
> I checked the jackd manual and tried to use the option to jackd --<br>> port-max but got a usage message and jack exited.<br><br>what usage message?</blockquote><div><br>
Apologies, my bad, it was the alsa module usage message, I misplaced the
--ports-max arg causing the error.  I'm spending too many late nights doing
mixes.<br>
 </div><br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">> I also tried setting the inputs of the busses to the outs of the<br>> various tracks and found that the settings were gone after I reloaded
<br>> the session (I double checked that I set the inputs more than once to<br>> repeat the problem)<br><br>this is typical when running out of ports causes problems.</blockquote><div><br>
<br>
that sorted that, deepening my sense of embarrassment for posting late at night.<br>
 <br>
</div><br><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">> I also found when recording my mix down to a stereo track within<br>> ardour that the busses  I send to don't appear on the recording to the
<br>> track, only when I use in's on the bus, am I doing something wrong?<br><br>please restate. i can't understand quite what you mean here.<br><br></blockquote></div><br>
Ok, I have track(s) with recorded audio on it and buss(es) set up for
effects. The track and buss outputs are to the inputs of the master out
via the output button and the bottom of each strip. <br>
I have a track setup to record the tracks and effects busses of this mix for this session (Audio12).<br>
<br>
When I set up a pre-fader send to a buss it will play fine and I can
hear the effect, I record enable Audio12, but when I press master
record and play, and start the transport, the busses go silent and are
not included in the recording. I've tested this by selecting two tracks
only (guitar and kick bass), activating the sends (which plays fine)
then disconnecting the output of the tracks from the (input of the)
master out so only the effects busses are audible, which worked as
expected. When I pressed master record and start, the effects buses
again went silent.<br>
I took it a little further and put a post-fader send from the master to
the record track then I tried a post fader send from the buss to the
record track but both went silent when I pressed record.<br>
<br>
So I'm not real sure what else I should do here or if I'm totally
missing something, I know what I want to do, and it sounds right when I
do it - it just won't record.<br>
<br>
What did work was when I set the buss input to the track output, when I
disconnected the track output from the master it recorded the buss
effect output ok, but this is not what i am after (huge as it sounds)
as I'm trying to send track pre-fader audio to the buss for recording
(to support the sound rather than overwhelm it with fx). <br>
<br>
I tried piping the sound through jammin and back to my record track
with much the same results but I'm still trying things here (plus I'm
not ready to master yet). The same thing is happening when I use
inserts. Maybe I could send a screenshot, it might clear some things up?<br>
<br>
I hope I made more sense this time around, if you need anymore detail let me know. <br>

Thanks for responding.<br>
<br>