Greetings,<br>
<br>
I'm not real sure if I'm having some problems with ardour or jack with respect to the amount of
ports I can use. I have a mix that consists of 15 tracks (2 stereo) and
14 busses (10 stereo including the master). All the busses have a
plugin each, the tracks have two plugins each and all have outputs to the master bus inputs.<br>
<br>
I tried setting up track pre - fader
sends (my preference) to the bus(es) but after setting four ardour  (1.2.1/0.904.1) exits immediatley with the
error<br>
<br>
cannot deliver port registration request<br>
Aborted<br>
<br>
<br>
Jack ( jackd 0.100.1 with args -R -d alsa --hwmon -r 44100 -p 512)  prints the following messages <br>
<br>
no ports available!<br>
subgraph starting at ardour timed out (subgraph_wait_fd=7, status = 0, state = Triggered)<br>
 <br>
 <br>
**** alsa_pcm: xrun of at least 0.926 msecs<br>
 <br>
cannot read event response from client [ardour] (Connection reset by peer)<br>
bad status for client event handling (type = 8)<br>
cannot send event to client [ardour] (Broken pipe)<br>
bad status for client event handling (type = 8)<br>
 <br>
 <br>
**** alsa_pcm: xrun of at least 175.250 msecs<br>
<br>
I checked the jackd manual and tried to use the option to jackd --port-max but got a usage message and jack exited. <br>
<br>I also tried setting the inputs of the busses to the outs of the
various tracks and found that the settings were gone after I reloaded
the session (I double checked that I set the inputs more than once to
repeat the problem)<br>
<br>
I also found when recording my mix down to a stereo track within ardour
that the busses  I send to don't appear on the recording to the
track, only when I use in's on the bus, am I doing something wrong?
Thanks.<br>
<br>
<br>
<br>
<br>