Total newbie here, so please forgive my ignorance. But...<br>
<br>
I am running a self-built system. The processor is a <span style="background-color: rgb(255, 255, 153);">Athalon 64 FX-53</span>. The Mobo is a <span style="background-color: rgb(255, 255, 153);">Gigabyte GA-K8NSNXP-939</span>
 (nForce 3 chipset). The sound card is the <span style="background-color: rgb(255, 255, 153);">M-Audio Audiophile 192</span>. The operating system is <span style="background-color: rgb(255, 255, 153);">Suse Linux 9.3</span>
, and I am using the <span style="background-color: rgb(255, 255, 153);">Gnome desktop</span>.<br>
<br>
As <span style="font-weight: bold;">ALSA</span> <span style="font-style: italic;">does not provide a driver for the Audiophile 192</span>, I purchased the <span style="font-weight: bold;">4Front Technologies</span> license for the professional 
<span style="font-weight: bold;">OSS</span> device drivers. I followed the "install" and "readme" notes. I was successful at getting good clean sound out of the 192 (the <span style="font-style: italic;">
OSSTEST</span> file played crystal clear and most of my system prompt sounds were present). This is as far as my success went!<br>
<br>
I did not bother with the <span style="font-weight: bold;">realtime-lsm</span>
work-around for non-root privileges. From the info I read on the
work-around, the user is still opening up holes that can be exploited
by hackers. So, logging in as root, I went to "/usr/lib/oss/bin/",
execute the command "./soundon", then pull up QJackCTL and hit
<START>. Jack starts. However, when I pull up Ardour I am unable
to set any <span style="font-style: italic; text-decoration: underline;">connections</span> using the QJackCTL interface <span style="font-style: italic;"><Connect></span> or <span style="font-style: italic;"><Patchbay>
</span>
interface (I'm assuming this must be done to enable Ardour to work with
the Audiophile 192 ports). It is as if I had no sound card!<br>
<br>
<span style="font-style: italic;">Side Note</span>:<br>
For what ever reason, starting Jack also somehow corrupts the .mozilla
directory where my Firefox profile resides. This results in my not
being able to open up Firefox at all. I have to delete the entire
.mozilla directory and build a new one (error message tells me I have a
<span style="font-style: italic;">segmentation</span> problem)!<br>
<br>
The sound mixer in use is <span style="font-weight: bold;">Aumix.</span> When ALSA is running I can see four choices under Aumix, <File>, <Change Device>: <br>
0: Realtek ALC850 rev 0 (OSS Mixer)<br>
<span style="background-color: rgb(255, 255, 153);">1: ICE1724 - multitrack</span> (OSS Mixer)<br>
2: Nvidia CK8S (Alsa Mixer)<br>
3: ICEnsemble ICE1724 (Alsa Mixer)<br>
<br>
The 192 will only work with #1 ICE1724 - multitrack. However, when
ICE1724 - multitrack is chosen, either no controls will display or only
one slider will apperar (synth). <br>
<br>
Reading some more, I figured it might be that I'm starting OSS after the system boots and the Gnome <span style="font-style: italic;">GUI</span>
is already up. So I go into soundconf and set OSS to start at boot
time. However, when I did this, Ardour will only come up for a few
seconds, then I get an error message stating that Ardour was too slow
for Jack. Ardour then shuts down and Jack stops!<br>
<br>
Messages I read from <span style="font-weight: bold; font-style: italic;"><a href="http://ardour-users-ardour.org">ardour-users-ardour.org</a></span>
so far, are from people using ALSA. Is OSS a bad choice for working
with Ardour? Should I get rid of the 192 and get an RME Hammerfield (my
research says this card <span style="font-weight: bold; font-style: italic;">IS</span> ALSA compatible)?<br><br>-- <br>From the fretboard of,<br><br>Neckbone