[Ardour-Users] Behringer FCB1010
paul at linuxaudiosystems.com
Mon Jan 30 06:28:41 PST 2017
I don't have a binding map for the FCB1010. There are many other examples
in both a distributed version of ardour or the source (in the midi_maps
I also realized that you can't tell ardour to use multiple binding maps at
On Mon, Jan 30, 2017 at 3:23 PM, Matt Keys <matt at mattkeys.net> wrote:
> Thank you for the prompt response and tips! As you have one would you mind
> sharing your mapping file? I'd like to start from a working example and
> attempt to customize it.
> *From:* Paul Davis <paul at linuxaudiosystems.com>
> *Sent:* Monday, January 30, 2017 8:41 AM
> *To:* Matt Keys
> *Cc:* ardour-users at lists.ardour.org
> *Subject:* Re: [Ardour-Users] Behringer FCB1010
> You would need to write a MIDI binding map for that. The process for this
> is documented in the Ardour manual.
> Be warned - I have an FCB1010 and the messages it sends are not always
> ideal for control purposes.
> On Mon, Jan 30, 2017 at 2:39 PM, Matt Keys <matt at mattkeys.net> wrote:
>> Hello list! My setup is a Intel NUC running Debian 8 amd64 and I'm using
>> the default ardour3 package (ardour3_3.5.403~dfsg-3_amd64.deb). My audio
>> interface is a Tascam 16x08 usb. I have the midi out port of the tascam
>> plugged to the midi in of my foot controller, and the midi out of the foot
>> controller plugged into the midi in of the tascam. I also have a M-Audio
>> Keystation 88 plugged via usb. I'm able to use the M-Audio in Ardour, but
>> my question is where do I configure the foot controller? I would like to do
>> things like start/stop recording, control volume, stereo panning, loop
>> start/stop, or effects insertion/removal.
>> Ardour-Users mailing list
>> ardour-users at lists.ardour.org
>> To unsubscribe or change your mailing preferences please visit:
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Ardour-Users