[Ardour-Users] Using a 'clean' bus to compare

[Ralf Mardorf]

PPS:
> PS:
> > If I were you, I would start with adding Fon's parametric EQ to each
> > audio track and 1 post-fader aux send to share one reverb for
> > all tracks by default. Try not to use any other effect, for most
> > things people nowadays use a compressor, no compressor is needed, it
> > could be handled by using a single instance of an EQ, such as Fon's
> > parametric EQ.
> 
> A single instance per audio track ;), to give each instrument it's own
>   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "room" (within the frequency spectrum, so you can control dynamic,
> transparency and tone of the instruments.

My apologies, a last PS.

An EQ can _not_ (at best less) control the dynamic of a single
instrument, but by carefully usage of EQs for each instrument, you have
much control over the dynamic of the stereo sum.