[Ardour-Users] lo/hi pass not working
pshirkey at boosthardware.com
Sat May 4 09:39:47 PDT 2013
On Sun, May 5, 2013 1:55 am, Don Fredricks wrote:
> Patrick Shirkey wrote:
>>> Patrick Shirkey wrote:
>>>> Can you spot anything obvious there? It's the three central strips.
> Try moving the plugins up to the pre-fader position. I suspect that the
> takeoff point for the monitor bus is before the fader. (But I've never
> used a monitor bus in A3, so that's just a guess on my part.)
Gave it a shot but it didn't change anything. However, I added a lo pass
*after* the send in the "drums" track it affected the signal in the
drums-fx track. I'm not sure why that is happening as the signal in the
drums-fx track should be coming straight from the send *pre* lo pass
I also tried changing the tracks attached to send1 to busses instead of
audio tracks but that didn't change anything.
I tried using the output from drums instead of the send and that didn't
Now I have added the actual audio track to the "drum-fx" track and deleted
the send. That allows me to hear what I was looking for.
Boost Hardware Ltd
More information about the Ardour-Users