[ardour-users] Question about monitoring & latency compensation
Jan Depner
eviltwin69 at cableone.net
Mon Jul 5 19:06:40 PDT 2004
That's got to be something in Ardour itself. There are so many switches
in there I can't keep them straight ;-) Of course, when you just
playback and don't record you really want it to go to PCM Out 1 and 2
anyway.
Jan
On Mon, 2004-07-05 at 20:45, idragosani wrote:
> Jan Depner wrote:
>
> > That is decidedly weird. I think I used to see that problem a
> > looooonnnnnng time ago. What version of ALSA/envy24control are you
> > running?
>
>
> Pretty much the latest stuff as far as I can tell:
>
> ALSA version 1.0.5a
> envy24Control 0.5.0 (from ALSA tools 1.0.5)
>
> It's like something is dynamically watching the ports and changing the
> monitoring based on where the signal is going (it'll switch to PCM out
> if I start playback in Ardour).
>
> -- Brett
>
> > Jan
> >
> > On Mon, 2004-07-05 at 17:53, Them wrote:
> >
> >> Jan Depner wrote:
> >>
> >>
> >>> Yes. You need to unmute each channel that you want to come through in
> >>> the digital mix. You also need to bring the left and right sliders up
> >>> for each channel. So, for instance, if you want channels 1 and 2 to
> >>> come through the digital mix you need to bring PCM Out 1 and PCM Out 2
> >>> up in the Monitor Mixer tab. If you want to hear them as stereo then
> >>> just bring up the left for PCM Out 1 and the right for PCM Out 2.
> Also,
> >>> if you want to hear HW In 1 you need to bring up both of those sliders
> >>> and unmute the channel. It takes a while to get used to but it's very
> >>> powerful. Once you have things set the way you want you can do an
> >>> alsactl store to save them. Then alsactl restore will reset to those
> >>> settings.
> >>
> >>
> >> That was the problem, the hardware channels were muted.
> >>
> >> However, I am still getting strange happenings while recording. The
> biggest issue is that, while use Digital Mix to monitor both my live
> incoming channel with the previously recorded channels playing back
> through the PCM out channels, the monitor will just randomly switch back
> to HW1 IN -- and suddenly the live channel is the only thing I can hear,
> which of course ruins the recording take because I can no longer hear
> what I am playing with. This may an issue with the ice1712 driver. Is
> there a way to "lock" the monitor so it stays where it is set?
> >>
> >> Also, it seems after several minutes of working in Ardour, and
> especially when I am just playing back stuff, the entire workstation
> will get stuck on a single sample that repeats endlessly and the machine
> locks up and requires a reboot. I'm not sure if this is an issue with
> Ardour, JACK or Alsa, but I haven't seen the problem using Rosegarden
> and JACK.
> >>
> >> -- Brett
> >>
> >> _______________________________________________
> >> ardour-users-ardour.org mailing list
> >> ardour-users at lists.ardour.org
> >> http://lists.ardour.org/listinfo.cgi/ardour-users-ardour.org
>
>
>
> _______________________________________________
> ardour-users-ardour.org mailing list
> ardour-users at lists.ardour.org
> http://lists.ardour.org/listinfo.cgi/ardour-users-ardour.org
More information about the Ardour-Users
mailing list